IMPORTANT:
- Make sure you’re using correct print settings and high-quality PETG.
- This vase can be watertight – but only with proper tuning.
- Vase mode prints with one perimeter only – so walls will be thin by design. This continuous outer wall (no Z seam) is essential for watertight results.
This is a clean, modern vase with a simple silhouette. When printed in transparent PETG, it has a glass-like look and makes a beautiful minimalist decor piece.
Recommended settings for watertight results (worked fine for me, but might not work perfectly on every printer):
- Material: PETG only (tested with Sunlu clear PETG)
- Print Speed: 50% (Silent Mode)
- Flow Ratio: 1.04
- Nozzle Temp: 265 °C (all layers)
- Layer Height: 0.16 mm
- Outer Wall Width: 0.5 mm
- Bottom Layers: 6
You can also try the included print profile.
Please consider leaving a review and boosting it for free—it really helps. And if it worked well for you, feel free to share your print!
Thanks for reading & happy printing! 😊
Sevon
