Steelcase Leap Headrest Adapter variabel

I made a Headrest Adapter for some cheaper amazon headrests, since i found the solution for the atlas headrest adapter (found on reddit) a little bit too expensive. The inspiration is from SamuraiKek, who made the model for the atlas headrest and posted it on reddit.

The headrest i use is this: Headrest (Aliexpress) but you can find similar ones on amazon

You need:

Steelcase Leap V2 (obvious)

M5x40 screw and nut

M4x30 screw and nut

First align the three parts with the pins and glue them together:

After that you install the Adapter with the Screws to it, after that youj can mount the headrest on it.

The Headrest can be aligned in height and depth, for that you just need to loose the M4 Screw and screw back in in one of the other holes. 

My prints are all done in PLA. This is the first Version of it, i am currently testing the strength of the model. So stay tuned, maybe i will come up with a Version 2 with some enhancements. Let me know if you have any ideas! 

Have fun, hope you like it :)