Horizontal Desk Holder for Razer Seiren (v1) Mic

This is a horizontal desk mount for the Razer Seiren (v1) microphone. With the stand attached it just doesn't have a good home on my desk, but horizontally it fits really nicely right below my monitor.

It's designed with an interference fit so with a little pressure it will snugly stay in place. The cavity on the left side and the hole on the back should leave plenty of room for the stock cord, but there's a little extra room for other slightly chonkier cords as well.

--

Printing Notes:

I printed it flat on its base which meant there were a bunch of rough spots internally where support had to be removed – which was pretty difficult only using a single filament. I'd highly recommend using a different one for the support material for ease of removal, or print it at an angle so as to avoid the internal overhangs.

I tried printing it this way as well – the only drawback is that the rough “top” of the print where the layers are most-visible end up being pointed right at you, which just doesn't look quite as good.