Jack Sawyer running for endzone

hours to print

This is Hueforge of JackSawter Running To Endzone

Takes 9 hours to print

Project: jack.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240.9x160.68mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Scarlet Red
    At layer #19 (1.6mm) swap to Ivory White for the rest.