January 12, 2025
Description
Kawaii Hueforge Ornament or Coaster Kodama/ Forestghost in a Lava lamp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
2 versions included
with hole for wall decoration/ as Ornament
without hole as Coaster
if you have any issue, contact me <3
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.7mm and the Actual Depth is 2.8mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA PolyTerra Forest Green Transmission Distance: 0.5
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #17 (1.44mm) swap to Dark Blue
At layer #20 (1.68mm) swap to Forest Green
At layer #24 (2mm) swap to Arctic Teal
At layer #29 (2.4mm) swap to Jade White for the rest.
Boost Meplease boost me <3 for more cute/kawaii hueforge
License:
Standard Digital File License
PastellPrints3D
