January 12, 2025
Description
Have a Playstation 4 Pro inside a enclosed space/shelf and air can only go in and out from the front?
Rear of the Playstation 4 heating up like crazy?
Fan spinning hard to keep it cool during long game sessions because hot air cannot escape?
Heres the sollution!
Its an airduct that just sits ontop of the console that redirects all hot air over the console and out the front. If you got 3cm of room ontop of the playstation then you are good to go.
But it wont help if the console is in the open in any way!
As its only a airduct no USB or 12v fans are required!
Installs super easy and removing is just as easy!
Print with the rear flat "thin and long" surface Down and no supports are needed!
Uses about 250g of fillament. 5-10% infill is enough!
2 Versions!
"Full Size" can only be used with 300x300x300 printers
"Left Side, Right Side and Extension" can be printed on 200x200x200 printers in 3 pieces and then glue the pieces together to get the same part. Epoxy or Superglue should work just fine.
License:
BY-NC
RikiMoto
