Daisy Garden

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 90x190.91mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA Chrominal Penumbra Gray Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA Chrominal Serpent Green Transmission Distance: 8
    PLA INLAND ORANGE Transmission Distance: 5.4
    PLA BAMBU YELLOW Transmission Distance: 4.8
    PLA BAMBU BLUE Transmission Distance: 1.9
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (0.6mm) swap to Penumbra Gray
    At layer #18 (0.84mm) swap to Jade White
    At layer #19 (0.88mm) swap to Serpent Green
    At layer #26 (1.16mm) swap to ORANGE
    At layer #33 (1.44mm) swap to YELLOW
    At layer #42 (1.8mm) swap to BLUE
    At layer #49 (2.08mm) swap to Jade White for the rest.