Shoe Stacker Pro | Quick Strong Organization

Shoe Stacker Pro is here! This is the newest version of the V1 version keeping its core goals of quick printing and minimal material usage with additional plates for when you need more strength.

 

The standard plate which most should print hits the same goal of 2 hours or better and under $2 dollars of filament but is much stronger. The platform is still thin and there may be sag with heavy shoes but the tower is stronger with a better geometry.

 

In addition to the standard model there is a new Tuf model that adds an extra 2 MM of thickness to the platform. This of course adds some time but makes for a stronger platform.

 

There is also a Max model which makes the tower even thicker and the platform extra strong. I haven't tested what this can hold yet but I certainly will hold all your heaviest shoes. The goal here is a print under 3 hours, 50% more than then the standard print but when you need the strength you need the strength!

Lastly we have a number of accessories. A top plate and a 60mm riser for when you want to finish your tower or need a bit more height.

 

 

To get the speeds advertised its important you go into your filament settings, then cooling and uncheck "slow printing down for better cooling", this is a good setting to have on in general but is NOT needed for this print and will slow down your print more than is needed. The tower has no overhangs and a not fully cooled previous layer will actually increase adhesion making for a stronger model.

 

Happy Printing and if you like this model please consider a boost! It helps me get the support to test out these models.

 

Boost MeConsider a Boost to help support me learn and upload more models.