Nozzle, Sock & Status Disc Holder (Bambu A-Series)

A complete and compact storage solution for Bambu A-Series hot end components.

I was unable to find a model that housed everything that I needed…..and while regularly switching nozzle diameters on my machines, I decided to create this model. It will house up to:

• 4x Nozzles (0.2, 0.4, 0.6, 0.8mm Stainless or Hardened, mix and match as you please)
• 4x Nozzle Silicone Socks 
• 4x Extruder Status Discs (excellent design by JAV-3D can be found here)

Having the spare socks stored above (and crucially separate from) the nozzles means you can just swap the current sock between the one you are removing and its replacement. 

While the extruder cover is off for the nozzle swap, you can grab the correct status disc and install it also. This way you should never forget what size nozzle is installed, and it can be easily read from across the room at a glance…. a real game changer. (If you haven't removed the stock Bambu one before, its really easy, just apply a little pressure behind the disc, Bambu recommend using the scraper for this, but I manage with just fingers)

I have provided two different model profiles:

1. with pegs on the rear which will fit securely onto any Ikea Skadis pegboard. Titled 'Skadis Pegs'
2. with a flat recess on the back to accept command strip / double sided tape of your preference. Titled 'Stick On'