Vi from Arcane

Project: VI from arcane.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Kexcelled Lake Blue Transmission Distance: 3.6
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Lake Blue
    At layer #10 (0.88mm) swap to Scarlet Red
    At layer #13 (1.12mm) swap to White for the rest.