Amazon Basics Electric Screwdriver Case (Denali)

Bought this little Amazon Basics electric screwdriver for $25 and its pretty amazing but needed a case. There are a few great designs on here but I had a Fanttik and I liked how the case was vertical so I used that in my design process. I added threads to lock the lid on so it wont come loose over time or come off on its own. The driver, bits, and extension extension fits in nicely. I added a knurling texture to give it a nice feel but this does take a bit more time when printing. Depending on how popular this model gets, I might add a different texture that's quicker to print. I made up a logo for the screwdriver and have it on the top lid so its easy to identify what it is. The 3mf file also has a lid without the logo. I have also designed a v2 of this case that has storage in the bottom to hold extra bits or even the USB cable. This is found in the other print profile.

Print settings:
.2 layer height
.3 initial layer width (for logo)
Arachne Wall generator
3 Wall loops
5% Cubic Sparse infill
40 mm/s Initial layer speed (for logo)
60 mm/s initial layer infill speed (for logo)
Normal Snug Supports used (used for v2 with storage)
On bulil plate only enabled (used for v2 with storage)
.21 top z distance  (used for v2 with storage)
.5 Support/object xy distance (used for v2 with storage)