Low Profile P1S/X1C/P1P Riser with Diffused LED

P2S LOW PROFILE RISER IS NOW AVAILABLE 
→ Low Profile P2S Riser with Diffused LED ←

This riser adds 18.5mm to the top glass height. This does help some with the “filament pull out error” as the PTFE tubes is not bend by the glass.

This riser design allows for a LED strip to be installed with 3D printed diffusers for a softer light.

Benefits of this design:

• Soft inner corners allows the LE strip to follow along without any sharp bends. And no soldering is needed.
• The riser is designed so you can install 4 diffusers so the LED strip does not shine too hard.
• The design of the riser does not need any support for printing. (no additional clean-up is needed)
• All parts snap perfectly together and does not require screws or glue.
• All 4 main parts are labeled with numbers to ensure an easy assembly.
• No Support material is needed - the riser only needs assembly.

My riser are printed in:

SUNLU PLA+ Black

GEEETECH Matte PLA White

For P1S users: you can just use a regular USB LED strip with the USB port next the the screen. (inside the printer)

When installing the diffusers, make sure you assemble them in the correct orientation.

The two long cutouts on the diffusers should be on the front of the riser:

Licensing

All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.

For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.

How to Support Me

If you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.

Also please consider donating via https://www.buymeacoffee.com/make3d 
All support is highly appreciated!

UPDATE 21-12-2023:

I have changed the design of the front panels for it to fit the P1P model - I was informed the P1P was a tiny bit smaller and the original riser would not fit.

I have not tested this myself, but got the dimensions from another user.

UPDATE 24-12-2023:

I have added a hole on the back left side for wiring to external power supply. This is mostly for all X1C users.

UPDATE 26-12-2023 (Version 4):

I have changed the hole shape so you are able to wire a USB plug or power supply without having to solder any wires.