Pocket Hole Drilling Jig

Simple Pocket Hole Jig

Fits 3/8" drill bit perfectly. Just have to run bit through it once.

Designed for 2x8 but can be used for pretty much any size board.

Printed in PETG HF and it stood up fairly well. Clamped 1.75" from end of board. Used for drilling 24 holes into 2x8's and could still use it for more. Did start to elongate the hole on the bottom a bit as seen in pictures but pockets were fine.

Wouldn't recommend for frequent use but it is a great alternative to spending $20-$50 for a jig if you're only doing a couple smaller projects.