Small parts case (large) V2 w. 8 different box types

This is a small parts tray with a large variation of boxes so that you waste as little space as possible. Tray size: 24cm x 19.5 cm. This means your print bed needs to be at least 24.5 x 20 cm large. Otherwise you cannot print with a brim. There are a variety of boxes included. The naming for the boxes assumes that the width of the half-tray (left/right side of the central barrier) is equal to 1. Full-height box, widths 1, 1/2, 1/3rd Half-height box, width 1/2 2/3rd height box, widths: 2/3rds, 1/3rd 1/3rd height box, widths 2/3rd, 1/2. So 8 different sizes in other words. Please refer to the photo I used a Prusa MK3S with Verbatim PLA to print this. Print the tray with a brim. Make sure you have a stable temperature around the printer. If the base detaches from the bed too much, there is a risk that the boxes become a bit squeezed in the tray. This can be later compensated by using smaller boxes as they introduce more space between boxes.