Doomhammer

Project sculpted on stream over at https://www.twitch.tv/alexcoman . Made especially for cosplay, the Doomhammer can be printed at human scale. For a male at 185 cm height, I suggest all parts to have 800% scale. You can adjust to your height what scale you want. You can also print it smaller if you want it as a display piece. YOU WILL NEED TWO PART EXPOXY RESIN to glue the parts together if you chose to print it by parts. Sorry for the caps but I just wanted to make sure everyone who starts printing it sees it. You can add lights inside since I sculpted it both from the outside and on the inside so the LED's shine only through the cracks, there is a photo of that too. For me, at 800% scale, the prints took around 1 week and a half to finish. It's not an easy print. I've included photos of the print, of a render + suggested print orientation for the stone parts. Please let me know if you like it by hearting it and leaving a comment. Drop a follow if you'd like to see more prints. I will finish the base you see in the render of the cover photo and upload it in the near future.