Marvin the Martian Disintegration Pistol

Marvin the Martian Disintegration Pistolby RebelTaz This is a life sized replica of the disintegration ray pistol used by Marvin the Martian. Some liberties may have been taken in the recreation of this weapon, but... I have created a decal that can be printed on clear decal paper and applied to the body if you so choose. I have included the decal in multiple formats. Surely one will suit your needs. Just be sure that it is printed at 100% scale for a proper fitment. There are several option in printing this. You can print each piece as a whole, or if you prefer, I have split some of the pieces in half so that they can be printed flat on the bed and then glued together upon assembly. This is how I printed the handle and the barrel. I decided to print the body solid. At my resolution (0.2mm) I think it gave a better result. Please ignore the lines in the print... I had some issues with my Y axis. If you want to lay the handle flat on the bed, you will need handle_left and handle_right as well as two of the pin_x2 instead of handle_solid. Similarly, for the body, you will need body_left, body_right and three of the pin_x2 instead of body_solid. pin_x1 is used to align the knob with the prism. I have also provided the barrel in two configurations - one where the barrel and the ring set are one piece [barrel_withRings] and one where the barrel and the ring set are two separate pieces [barrel_noRings and rings]. If you want to use multiple color filaments, you can use the split version and then slide the ring set down on the barrel and glue it in place as I did.