60'S DRIVE-IN DINER DIORAMA FOR HOT WHEELS / DIECASTS 1:64

Another 1:64 diorama for my Hot Wheels display series. The drive-in diner was in the 60's an iconic place where everybody gathered to have a good time. I tought it would be great to make one, with LED lighting to showcase my "vintage" hot wheels. Everything is easy to print, and fit a pruse/ender bed. But its pretty tight. Adjust your slicer settings to have your ender bed to its full capacity (235mm). In the roof, there's a duct where you can easily install a LED strip. The same duct goes from the roof to the signage, so its easy to light both. The back of the diner is open, so you can add accessories inside the restaurant and even a printed decor if you want to close the back. Everything is easy to assemble, no need for instructions but if you need help, just ask me here or on my Facebook Page (see my profile) EVERYTHING IS ALREADY PLACED in the right orientation for easy printing. You may need some supports for the roof only (for the wire path). But build plate only. No need for supports inside the light duct, it will bridge with no problem. Great for display and photoshoots. Have fun printing!!!! Follow me on facebook: https://www.facebook.com/PA1MAKER