LOG CABIN BIRDHOUSE

NOTE: FOR COMMERCIAL USE AND SELLING YOUR PRINTS, FULL ACCESS TO ALL MY MODELS AND EXCLUSIVE STLs JOIN MY PATREON: https://www.patreon.com/PA1_MAKER FEATURES:-Very few supports (only on top beam and chimnee)-All parts are already placed in the right orientation-Large bottom door for cleaning between seasons-3 diameters of entrance included: 28.5mm, 32mm, 38.5mm-Detailed exploded view to help you with the assembly-Big parts can be done with a layer height of 0.3 with no problem to speed up printing time. (House body on the pictures was made with 0.3 layer height)-Sturdy and strong design, with thick walls that won't deform overtime. Be sure to have your bridge settings at "ON".For the small parts, use 4 walls. This will make a stronger piece. Watch for over extrusion. If you're having some fitting problems, simply sand gently the parts to help them fit together. But with a good calibration, everything should be fitting together very well. Can be hang or wall mounted. This one is very close to the limits of a prusa mk3s bed. It will be ok on a ender 3 bed, but for prusa owners i suggest that you double check all big parts. At least you can scale them down by 1% to help if necessary. SCALES :100% - Will use m4 screws.75% - will use m3 screws. If you choose to hang it, you have two holes provided on the top beam. If you have any problems, just send me a message. Have fun!!!