STEAMPUNK / INDUSTRIAL DICE TOWER!!! 100% SUPPORT FREE!!

NOTE: Copyright PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE: https://www.patreon.com/PA1_MAKER   Just finished this very cool steampunk/industrial dice tower!! :) Industrial look with lots of details, fun to build and support free!!!Works with any 16mm dices. -Fits on a Prusa Mini!-Support free-235mm tall when completed-multi-parts-29 easy to follow exploded views-All parts already placed in the right orientation for printing. FOR THE BASE:You will find two files. One with "base with custom support" in the name, in which the only support needed is already included. (counterbored holes underneath) If you prefer using your own support, another file called "base" is in the folder. But use CUSTOM support for the counterbored hole, and no other support, unless you're gonna have a lot of useless supports in the letters of my logo. Letters will print fine with good bridge settings. Refer to the 29 exploded views for assembly, they are included in the zip file. Because this is more a model kit than anything else, you will have to pay attention to details and use your hobbyist skills. :) But its pretty easy to assemble, just follow the instruction carefully, make some "dry fit checks" and have a look at the next steps of the assembly sometimes to help you understand the direction of the part you are working on. You will need two screws: M4x16mm Large parts: 0.2mm height Small parts, i suggest 0.15mm height for smoothness of the pipes etc... I you have any questions, just send me a message! :) Have fun!!! :) 3D PRINTING SETTINGS 0.20 mm height for large parts.0.15 mm height for smaller parts (like pipes and valves)3 walls10% of your favorite infill.   via GIPHY