Nerf technical(RC controlled)

Roughly a week of development for this one and probably around 6 less successful prints, this is what came of it! You hook it up to a receiver and use it as a standalone turret och put it on a RC vehicle. I hotglued it to the flatbed of my 3D printed RC truck V3, quite fun! As usual I went wild with hardware ... You need these:2x M3 rods x 40mm2x m3 rods x 75mm6x M4x1019x m3x1010x m3x163x standard size servos2x 6700zz bearingsCouple of rubberbands or springs You can find videos about this project and others at my youtube channel:https://www.youtube.com/mrcrankyfaceprojects Check me out at:Youtube: http://www.youtube.com/c/MrCrankyfaceProjectsInstagram: https://www.instagram.com/mr.crankyface/3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyfacePatreon: http://patreon.com/Mrcrankyface