Hover Tank

UPDATE Dec 4th 2023 for supported version: I have redone the supports on the body (the chitubox file with "fixed" in the filename). This should avoid the front left jet print failure as well as some issues the rear jets can have. With this beefier set of supports, I recommend using snips to cut the jet supports off in small clusters and making the cuts near the raft, then removing the support stems from the model as a second step.  A flying tank designed to permit a rotating turret with the use of 3mmx1mm magnets glued into indentations in the turret and tank body (like the small magnets in the Army Painter magnet set). This model's turret and tank body are interchangable with those of my Punk Tank and Rocket Tank. There are two stand options: one to look like smoke coming out of the jets, and a simpler/lower stand that can be glued onto the bottom of the tank body. The smoke base only fits into the jets when facing the correct direction, and the tank should drop onto it pretty easily. If it doesn't, it's probably backwards - so don't force it!