Phoenix SEMA edition parts set

The Phoenix SEMA edition parts set has been designed to fit the Vanquish Products VS410 Phoenix. Most parts are a direct bolt on. The interior details include a roll cage, detail switches and the I am that Guy driver aka Matthew Kett from Scale Builders Guild.  Click on "Object Parts" below to see all the parts that are included with this purchase. Installation information: All parts are fitted with standard VP hardware. The bar fenders will require you to cut of the stock fenders. The bar fenders can be glued (Shoegoo or E6000) to the body and/or screwed with M1.5x5mm screws (32). To install the hood blower you can use M3x5mm screws. The stock radiator relocates to the rear mount plate using the stock screws.  The interior roll bar installs with M3x5mm (4). The rear roll bar uses the stock screws that are also used to hold the fenders to the rear cage. The side mirrors will need a small o-ring and small body pin to install on the body. A M1.5x5mm screws (2) for the pivot (sold separately)