Snowflake Dragon Flexi

🌨️ Snowflake Dragon — a flexi with ball-jointed wings & lots of snowflake details so you can pose them & cozy up however you like! There’s also a wingless version if you just want a long, slinky noodle dragon❄️💫 Files Included:--StarMouse3D Snowflake Dragon STL & 3MF--SugarPaws3D Reindeer Dragon STL & 3MF Recommended Print Settings: -----Layer Height: .16-----Infill: 15%-----Supports: Not usually needed for the majority of my flexi files, but feel free to add them if your printer prefers a little help.-----Pro Tip: If the first layers struggle to stick, try slowing down the first layers or increasing the bed temperature slightly.Filament: Matte or Regular PLA recommended-----Tested to 70%----The bottom of the wings (bottom prints facing up) on the snowflake dragon is not perfectly flat to give it a little depth. It may stair-step depending on your layer size. You can reduce this by using adaptive layer height- but it will not be very visible after you install the wings. --------------------Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :) If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me. To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D Please do not share digital files! Thank you.Please be warned that these models are not toys and not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!