Cupcake Clicker & Treat Display

I designed a cute mini cupcake along with a matching tiered cupcake stand so you can create your own tiny bakery display!! Whether you’re decorating a shelf, staging photos, or building a pastel dessert setup, this duo is ready to serve 🥹🍰 Bonus if you have new cupcakes from another wonderful creator (or any other sweet treats!), because you can display them on this stand too!! ;D 🧁 Files Included: • 🍰 My tiered cupcake stand• 🧁 My lil cupcake 🧷 Clicker Fit Tips: These clickers are designed to fit together snugly without glue on Cherry MX / MX-style switches. Once assembled, they should stay together securely using just your fingers. Because printers and filaments behave differently, fit may vary slightly depending on flow and tolerance. • Print a single-color test of the top clicker piece first• Fit may vary depending on flow and calibration• If tight, gently warm the piece 1–3 seconds with a heat gun• A hairdryer works too (may need longer warming time)• Insert while warm for easiest fit• Let the piece cool fully before testing bottom fit• Press together slowly and evenly• If printer runs hot, lowering flow slightly can help• Matte & regular PLA behave more predictably than silky or high-flow• You may add a small amount of glue for extra security if needed Please be careful not to overheat parts, as they may soften or deform. 🖨️ Recommended Print Settings: • Layer Height: 0.16 mm• Infill: 15%• Supports: Not usually needed• Filament: Matte or regular PLA recommended• Adaptive Layers: Recommended for smoother effect Do not resize clickers unless there is a tolerance issue — everything is designed to fit at the current size. -------------------------------------- Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :) If you like this design, please check out my other models: cults3d.com/en/users/StarMouse3D/creations StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me. To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Patreon supporter through this link: patreon.com/c/StarMouse3D (or through other sites in which I offer a commercial license). Please do not share digital files! Thank you. Please be warned that these models are not toys and not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk! 🌙🐭✨