Craft Razor Blade Holder

You might also like these free designs! * Mini Craft Mitre Box: https://www.myminifactory.com/object/3d-print-73745 * Simple Caddy: https://www.myminifactory.com/object/3d-print-75660 * Mini Craft Clamp: https://www.myminifactory.com/object/3d-print-75154 * Mini Corner Clamp: https://www.myminifactory.com/object/3d-print-74993 * Quilling Templates: https://www.myminifactory.com/object/3d-print-55165 * Handy Little Hooks: https://www.myminifactory.com/object/3d-print-51642     Razor blades are super sharp, but not the easiest to use for craft applications.  They're very thin, and they're very flexible, and can't take a great deal of force.  They're unbeatable for fine craft work, though, and that's why this blade holder exists! Now, you want a pretty tight fit for the blade, so there are three versions included here - 0.2mm, 0.3mm and 0.4mm.  That's the width of the gap that takes the blade, since different printers and slicers will yield different results.  We're not talking about a lot of time or filament, here, though, so print one or two and see which one works best with your setup. There's a guard included, too, since leaving razor blades lying around is a recipe for disaster!  Have fun :)