Flexy Dalmatian Puppy Print In Place No Supports Exclusive

📦 𝗣𝗮𝗰𝗸 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀 🟣 Flexy Dalmation With 3MF File For Multicolor Print 🟣The Helmet Comes With A Snap-fit Option, So You Can Easily Attach It Without GlueIf You Do Want A Permanent Setup, You Can Absolutely Glue It In Place 🟣There Are Three Different Collar Options To Choose From, So You Can Customize The Look However You Like 🐾.. 🟣 Two Different Versions Included as Shown in The Print Shots, The Classics & The Storybook Version. ⚙️ 𝗠𝘆 𝗕𝗮𝗺𝗯𝘂 𝗦𝗲𝘁𝘁𝗶𝗻𝗴𝘀 & 𝗦𝘂𝗴𝗴𝗲𝘀𝘁𝗶𝗼𝗻𝘀 (𝗨𝘀𝗶𝗻𝗴 𝗕𝗮𝗺𝗯𝘂 H2C) 🖨️ 🧱 Wall Count – 4 (For Maximum Strength 💪)📏 Layer Height – 0.2mm🚫 No Supports Needed📉 Minimum Downscaling – 55% Of The Original Scale🟦 Outer Brim – ON (For Maximum Adhesion 🔒)🎯 Adaptive Layer At Max – Recommended for Single-Color Prints for Better Quality, especially when printing smaller parts ✨⚠️ For Multicolor Prints, Adaptive Layers may significantly increase print time ⏳⚙️ Rest of the Settings – Defaults💚 Bambu 3MF Files Included for Bambu Freaks!!! 📲Tag Me At 👇🏻 🎵 TikTok – tiktok.com/@printverse_designs📸 Instagram – instagram.com/printverse_crafts🔵Facebook- https://www.facebook.com/share/17xPJ9MtV9/ Printverse Designs Are Protected Under Copyright Law. By Purchasing, You Agree That You Do Not Have The Rights To Sell Any Digital Files Or Printed Models Without Explicit Consent. To Obtain A Commercial License For Selling Physical Prints, Please Visit The Link Provided Below. patreon.com/printverse Thank You For Placing Your Trust In Us !! If You Have Any Questions Or Need Assistance, Feel Free To Reach Out To Us At** 𝗧𝗵𝗮𝗻𝗸 𝗬𝗼𝘂, 𝗔𝗻𝗱 𝗛𝗮𝗽𝗽𝘆 𝗣𝗿𝗶𝗻𝘁𝗶𝗻𝗴 !!!! 🥂 😊