2x4 in Terrain Piecesfor 11th Edition - NuGoth Imperial

These files are designed to fit A1 Mini sized printers, and they come prepared for multicolour printing. ⚠️ Non-manifold warning The non-manifold warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual. This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality. ⚠️ About the colour-separated files The files are kept colour-separated on purpose. Most slicers allow you to combine or merge the parts into a single object for printing. If the files were exported only as one single STL, you would lose some slicer control, especially for things like Fuzzy Skin, which makes the stone texture look really nice on monocolour prints too. For Cura: import the parts, select them, right click, then use Merge. If your slicer handles this differently and you get stuck, just let me know and I’ll help you figure it out. +++++++++++++++++++++++ In the grim darkness of the 41st Millennium... sometimes a new edition drops a terrain shape you were not fully prepared for. This 2 × 4 × 4 in Obscuring Terrain piece was designed specifically to help the NuGoth Imperial set fully adapt to the new 11th Edition competitive layouts. Unlike the main NuGoth ruins, this piece is not foldable. It is a solid terrain element designed to cover the new thin, long and tall ruin footprint that appears in the updated layouts. It fills a gap that older foldable and modular terrain sets were not originally built around. The result is one of my favourite pieces in the NuGoth Imperial range: a narrow ruined tower with tall buttresses, layered gothic structure, and a lattice window system designed to suggest the veiled transparency of stained glass without needing translucent filament or leaving huge open gaps. It prints without supports, keeps a strong grimdark table presence, and gives competitive layouts the tall visual anchor they were missing. If you are using NuGoth Imperial terrain for 11th Edition layouts, this is the piece that makes the set feel properly complete. ⚠️ Do not leave any 3D printed part in the sun or in very hot environments, like a car in summer. PLA’s glass transition temperature is around 60 ºC, so be careful with your prints if you do not want warping. +++++++++++++++++++++++ Happy 40k games, and good luck on the dice!   These files are provided for personal use only and may not be distributed or sold. This license allows for the printing and modification of terrain pieces for personal use in games and displays. Please do not share this files, respect the creators effort by keeping these to yourself. Tinker Junkie is an independent creator and is not affiliated with or endorsed by Games Workshop Ltd. ‘Warhammer 40,000’ is mentioned solely to indicate compatibility.