HSW Tall Pen, Pencil, Marker Holder

I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)!  All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall with borders remix by @Waldmops_249902!

I couldn't find any HSW holder that I liked for my pens, pencils, and markers on Printables, so I created the HSW Pen, Pencil Holder. This new design is a taller version of my first design.

This HSW Tall Pen, Pencil, Marker Holder has two M4 holes for attachment to the honeycomb storage wall with two @RostaP “insert M4.stl” inserts.  The internal dimensions are 68mm wide by 40mm deep by 100mm high.  The inside bottom has ridges to help keep individual pens, pencils, and markers from sliding all around.

The provided STL file can be printed in PETG or PLA and does not require supports.

A PrusaSlicer 3MF file is provided for Prusament PETG.

A g-code file has been provided for the Original Prusa MK4 using Input Shaper at 0.2mm layer height.

The HSW Tall Pen, Pencil, Marker Holder seen in the photos was printed on an Original Prusa MK4 with Prusament Signal White PETG using Input Shaper with a 0.4mm nozzle at 0.2mm layer height with a 15% gyroid infill.

Note that this HSW Tall Pen, Pencil, Marker Holder is designed for the honeycomb storage wall, but it could be attached to any wall using two small screws!

Be sure to check out my other designs - including more honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models