IKEA ADILS Desk Cable Organiser Full Set

I created my own IKEA ADILS Desk Cable Organiser Full Set for everyone, who need simple Cable Organiser to IKEA Desk :-)

I tried to design a very minimalistic and simple design of my IKEA ADILS Desk Cable Organiser for desk / table leg of IKEA ADILS. Printing and using is very simple.

I will continue to use my shortcut in the text for IKEA ADILS Desk Cable Organizer = DCO.

I did 10 versions of my IKEA ADILS DCO:

1. IKEA ADILS DCO 1 - this DCO 1 only has 1 slot for 1 cable
2. IKEA ADILS DCO 2 - this DCO 2 only has 2 slots for 2 cables
3. IKEA ADILS DCO 3 - this DCO 3 only has 3 slots for 3 cables
4. IKEA ADILS DCO 4 - this DCO 4 has 4 slots for 4 cables
5. IKEA ADILS DCO 5 - this DCO 5 has 5 slots for 5 cables
6. IKEA ADILS DCO 6 - this DCO 6 has 6 slots for 6 cables
7. IKEA ADILS DCO 8 -  this DCO 8 has 8 slots for 8 cables
8. IKEA ADILS DCO 10 - this DCO 10 has 10 slots for 10 cables
9. IKEA ADILS DCO 16 -  this DCO 16 has 16 slots for 16 cables a use full space of ring
10. IKEA ADILS DCO .3mf - when You download this file, the first DCO is an unmerged object, so You can adjust the number of cable slots in the modeling program according to how many You need.

Printing:
Printing is really easy.

Also if You need some different sizes, You can take my models and resize them as You need :-)

I personally printed a IKEA ADILS DCO 6 for 6 cables without problems and I can recommend it. 

Instalation:

Installation is absolutely simple, You just put DCO on Your ADILS leg. If it doesn't work for You, I have two tips for You. First tip, use sandpaper and lightly sand the inside of the ring and the edges. Second tip, use a heat gun and heat for a few seconds. Do not heat for too long time to avoid permanent deformation. Once warmed up, put the DCO on Your ADILS leg immediately, after it cools down, the DCO organizer will hold nicely in place. I have tried both tips.

The dimensions of the DCO are very precise so that no glue or other type of connection has to be used. DCO holds onto IKEA ADILS by its own friction force and dimensions.

I hope You like it :-D

Print settings

Printer Brand:
Prusa

Printers:
i3 MK3S+

Rafts:
No

Supports:
No

Distinction:
0,20

Filling:
25 %

Thread Brand:
Prusa

Thread color:
You can use Your favorite color or colour of Your ADILS 

Fiber material:
PLA