September 9, 2024
Description
Birdy Suet Ball holder, like the one from the Birdfy Pro accessories kit.
Put your suet in there and woodpeckers will come eat it.
Print with supports and be careful to clean them off completely so the twist lock works.
Recommended: PETG w/ Supports at .20 or .15mm.
Update: Minor update to clean things up a bit and make it more printable. Also, check out the new version here Birdfy Suet Ball v2 If you are having trouble with supports and the twist lock.
Printer Brand:
VoronDesign
Printer:
Voron2 300
Doesn't Matter
Supports:
Yes
.20
Infill:
100
Notes:
Supports are needed. Auto supports on the "snug" setting with 25-30 degrees overhang should work.
Be careful with the support top/bottom z distance settings. You'll need to clear out the supports from a narrow bit in the top, so make sure it doesn't get fused with the rest of your print and is actually removable. You can also try flipping the top piece upside down, to make the top connection a bit easier to print.
Or check out the new version here Birdfy Suet Ball v2
License:
Creative Commons — Attribution — Share Alike
hrootzel
