G-Clamp ; Mini Vice

Hey there,

This thing is a small clamp for holding items down. 

The normal frame has a capacity of about 43 mm and is quiet strong. If the clamp is too short for your disered use, just print the long frame and screw or scale it up via your slicer! (remember to scale up every part by the same ammount!)

Please print all the parts with 100% infill for best thoughness.

Remeber: it's plastic and not as strong as metal!

I used Prusament PETG orange because I wanted the clamp to be able to bend.

Nozzle: 0.4

Layers: 0.2-0.24

Supports: none