Starlink Mini Suction Cup Mount for Car

Very strong suction cup mount for the Starlink Mini (22lbs per suction cup). No screws required, secures directly into where the kickstand is. Overengineered for extra strength (if you love your Starlink and your car why not). Great for mounting to the inside of your glass roof in Tesla. 

Printed on Bambu Labs Carbon X1 with High Temperature Plate

• PETG https://www.amazon.com/dp/B014VM9724/ref=nosim?tag=clamazon08d-20 
• Wall Loops 4
• Sparse infill density 25% (optional)
• Sparse infill pattern Cubic (optional)
• Enable supports
  • Type: Tree (Auto)
• Remove Small Overhangs: False (unchecked)
• Just auto orient the model and arrange all objects (with Auto rotate for arrangement checked)
• Print each model separately
• Suction Cups from Amazon https://www.amazon.com/dp/B08N13T8X2/ref=nosim?tag=clamazon08d-20 (should work with many similar versions)

Version 2: Removed text on the print from visible areas once installed. Added fingerprint icon on the bottom connector for where to press to lock the mount in place. 

Please post your make, review and questions so I can improve the model. If you want other types of mounts, let me know. 

If you are going to power your Starlink Mini from your cars USB C or 12 volt I can recommend the following components: 

• Adapter Starlink 2.1MM barrel connector to USB C https://www.amazon.com/dp/B0831G9CKS/ref=nosim?tag=clamazon08d-20 
• PD USB Cable with sufficient power rating https://www.amazon.com/dp/B0D2DHRXBC/ref=nosim?tag=clamazon08d-20 
• 12 Volt Adapter to USB C with sufficient power rating  https://www.amazon.com/dp/B0B3CSLPZR/ref=nosim?tag=clamazon08d-20 

If you leave your Starlink Mini power cord outside disconnected from the dish, check out this power cord cap. 

In case you need a Starlink Mini wedge mount that can be used as a replacement for the mount that comes with the Starlink Mini or as an extra, I have a model for you here.