GeeekPi 10 in rack shelf

Shelf v1 is 4mm thick, which may have been too thick. Shelf v2 is 2mm thick, and made the mounting holes slightly smaller to allow more material for structural integrity

Both are pictured in the rack. I included the F3D files if you want to modify.

Bracket v1 matches the hole setup of shelf v1 Bracket v2 matches the hole setup of shelf v2

4x M6 screws, washers, & lock nuts are needed to attach the bracket to the rear of the rack and shelf.

Print Settings

Printer Brand:

ELEGOO

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2mm layer height with 0.4mm nozzle

Infill:

**Filament:** Hatchbox PLA Black

Notes:

How I Designed This ===================

I measured the rack itself to design the dimensions of the shelf.

Category: Electronics