Magnet clothing clip

This clip was designed to allow you to clip it onto your clothing and attach things to the embedded magnet. 
 

I have a pair of glasses that included a magnetic sunglasses topper, I could never find a good place to put them when I wasn’t using them and wished for the days when I could simply hang my sunglasses on the collar of my shirt. 

You will need a 5mm X 1mm magnet to press fit into the hole.

when printing I would recommend checking the diameter of your magnet with calipers, if the diameter is less than 4.8mm you’ll want to scale this design down a few percent to try and compensate for the difference between the magnets I designed this clip around. The hole was made with a .2mm clearance for the magnet which usually makes a nice press fit. If your magnets are exactly 5mm they will likely be too “big” to fit in the hole and you’ll want to scale it up a few percent to get a good fit. A 4.9mm magnet should technically work but it’ll be really tough to get the magnet in there so be warned.