A1 Mini Handle Spool Adapter

Uses the A1 Mini Handle as a base (https://makerworld.com/en/models/425610#profileId-329241). The A1 Mini handle uses screws currently on the machine, no additional equipment needed.

This model also uses a re-purposed A1 Spool Holder. With so many AMS units being used, many have A1 Spool Holders simply in storage.

This adapter combines the two into a top-mounted A1 Mini spool holder. The spool sits about 45deg behind the A1 Mini's tower. Make sure the spool sits behind the tower, as a front mounted spool will collide with the top power cable.

Print Settings:

• 0.4mm Nozzle
• 0.2mm Layer
• 3 Walls (1.2 mm Perimeter)
• 5 Layers top/bottom (1.0mm Top/Bottom)
• Outer/Inner (Demensional Accuracy)