Ace Top Mount Kobra 3

Since receiving My first Kobra 3 I wanted to mount the ACE above the unit. I originally had it on a shelf, but it was difficult to work with so high. I saw other top mounts, but they needed to much filament, was overly complicated, and long prints. So I finally got around to designing this.

It is a simple design that connects to the top pole of the Kobra as well as the wall. 1 piece fits into the other. This gives it the freedom to have flexibility with how far your printer is from the wall. Because the weight is divided between the top bar and the wall, The machine is even more stable and has no issues with wobbling of tilting!

The Picture shows 2 but I currently us 3 mounts.

A single mount (15%) takes about 2.5 hrs and uses about 77g. You can print 3 sets on 1 plate. I suggest using Wall anchors as well as more infill. The further the machine is from the wall the more infill you need.

It is a tight fit. If you are having difficulties getting the back piece into the front piece, use a deburr tool on the edges of the back piece. Also the more you move it the looser it becomes, so try not to make it to loose as it is an intentionally snug piece.

I Have included the stls, bambu studio profile as well as the anycubic pronext file.

I have used this for several days with the printer on sports mode. With that being said……… I must cover my a$$ and add the following.

 *****Warning****** By downloading and/or using this product, you agree that you are solely responsible for any outcome. You are also releasing me of any responsibility. I am not liable for any damage that may come from using this item.

Community suggestion: 

Great idea! Attach the mounts to a board and screw the board into studs. This will make the mounts even more secure!

Commercial license

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.

Designers spend a lot of time and money on design! Supporting Patreon's is a small way to help us designers out and show your appreciation for the models. Not just appreciation for what we design but the time and money we put into designing and publishing.