Fairy & Mermaid - Fantasy Bookmarks Set Part 1

_______________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
_________________________________________________________________________________________________________________

These enchanting bookmarks feature a whimsical fairy surrounded by vibrant pink and purple tones, and a graceful mermaid swimming through a mystical underwater scene in teal hues. They are part of a set of four magical designs. The remaining two bookmarks in the collection will showcase equally captivating scenes, including dragons and unicorns, making the complete set a celebration of fantasy and wonder.

Sneak peek of the complete set:

 

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3
PLA 3D Jake Dark Green Transmission Distance: 0.4
PLA+ Jayo Mint Green Transmission Distance: 4.5
PLA KINGROON WHITE Transmission Distance: 6.9
PLA EryOne Matte Blue Lilac Transmission Distance: 1.5
PLA BambuLab Basic Pink Transmission Distance: 6.4

Color Pallete:

Swap Instructions:

Mermaid:
Start with Black
At layer #8 (0.72mm) swap to Dark Green
At layer #10 (0.88mm) swap to Mint Green
At layer #16 (1.36mm) swap to WHITE for the rest.

Fairy:
Start with Black
At layer #8 (0.72mm) swap to Blue Liliac
At layer #11 (0.96mm) swap to Basic Pink
At layer #15 (1.28mm) swap to WHITE for the rest.