AWTRIX 8x32 WS2812B flex LED with ESP32

I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. 

• Two piece frame must be print with support
• Back cover (with pins) should be print with support if you want texture design  

You will need:

• 16x M3 square nuts
• 16x M3x10 screws (12x with stand)
• 4x M3x16 screws for 67.5° stand