September 15, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.44x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Basico Control3D Black Transmission Distance: 1.6
PLA Basico Control3D Blue Transmission Distance: 3.2
PLA Prusament Azure Blue Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Basico Control3D White Transmission Distance: 1.2
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #15 (1.28mm) swap to Azure Blue
At layer #19 (1.6mm) swap to Beige
At layer #24 (2mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
fernandotg81
