BLV mgn Cube X-Carriage for Titan Aero Direct Extruder

Hi,

that's my interpretation of the Re-X-Carriage ... It's a Remix.

The following has been adjusted:
1.) Aluminum profile and MGN cars now fit perfectly in the gap
2.) The possibility to install the Duet Filament Monitor has been created.
3.) The position of the belt pick-up has been corrected.
4.) The fan bracket has been changed from 2 radial fans on the side to a radial fan on the back panel. Reason: The entire construction is much too wide in the original so the space is lost. The new position of the fan is not so.
6.) There is either the "normal" hose fitting for the cables to the HotEnd or a receptacle for a cable chain.

What is needed:
This cable chain: https://www.amazon.de/gp/product/B07LDCQTBN/ref=as\_li\_ss\_tl?ie=UTF8&psc=1&linkCode=sl1&tag=crazyc-21&linkId=88fa9433fb055d49612812e000eec965&language=de\_DE
and
this optical endstop: https://www.amazon.de/gp/product/B07LDCQTBN/ref=as\_li\_ss\_tl?ie=UTF8&psc=1&linkCode=sl1&tag=crazyc-21&linkId=88fa9433fb055d49612812e000eec965&language=de\_DE
and of course
Titan Aero: https://en.aliexpress.com/item/32815903993.html?spm=a2g0s.9042311.0.0.29154c4dmBvA6P

Furthermore, the usual small stuff. M3 screws :)

Print Settings

Printer:

BLV mgn Cube

Rafts:

Supports:

Yes

Infill:

Filament:
Janbex Goedis PLA, ABS Black, Blue

Category: 3D Printer Extruders