Desiccant Drying Baskets for Sunlu Dryer

If you're like me you have collected a big bag of desiccant packets. I have dried a few of them at a time in my Sunlu S1 drier, but wanted a basket, that fit in the drier, to hold a pile of them. This download has 2 baskets. A smaller one that fits into the bottom of the drier. If you need more room there is a bigger basket that fits on top of the smaller one. To dry, set the temp to the max and dry the packet overnight. The baskets have large holes all around for good air flow. These baskets could also be used in your 3D printed by setting them on the build plate and set the build plate temperature to 60 or 65 degrees C.

Print Settings

Printer Brand:

Bambulabs

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.20mm

Infill:

**Filament:** Sunlu PLA Grey

Notes:

Category: 3D Printer Accessories