Bambu LED Tray

The P1S is great but the interior is dim. I didn't want to add more lights on the interior or add a glass riser so I designed this light tray. This is a low profile tray that holds led light strips. It is intended to lay on the top glass and, if you have an AMS on the glass, it slips nicely under the AMS so it is hidden. It is 2 mm thick and the AMS has a bottom clearance of just over that. The trough for the led strip is just over 1.5mm deep so any light strip thinner that that will work. I used this: https://www.amazon.com/gp/product/B08CH6W7S4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

but I see this is not available, but most white light strips should be shallow enough (the one I used was 1.2 mm thick). Make sure you're wiring stays low also, and tack the wiring to the tray with CA glue (Krazy glue).

Print Settings

Printer Brand:

Bambulabs

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2 or better

Infill:

**Filament:** Bambu Lab PLA Black

Category: 3D Printer Accessories