Roto Vitamins - LGX Lite Mounting Pattern

This design uses the bolting pattern from an LGX Lite. Integrate our highly optimised lightweight gearbox into your toolhead for better print quality!

PRINT SETTINGS

Roto Vitamins - LGX Lite mounting was designed based on DfAM (Design for Additive Manufacturing). It was developed to be 3D printed without support with the front face that has the E3D logo on it placed down on the printing bed. 

Following are the recommended print settings: 

• Material: ASA/ABS (Avoid using PLA as they may warp due to the heat of everyday printing.)
• Perimeters: 4
• Top layers: 5
• Bottom layers: 5
• Infill: 40%

ASSEMBLY

• Make sure to print all the necessary STL files before starting this upgrade. 
• Fixings are not included in the Roto Vitamin kit, make sure to source them beforehand. The fixings required for the Roto Vitamins Assembly: 
  • 1 x M3x12mm 
  • 2 x M3x30mm 
  • 1 x M3x35mm 
• The fixings required for the mounting to the toolhead with a 5mm plate: 
  • 4 x M3x10mm

PRINT FILE

• Roto-Vitamins-Cover-LGX-Lite-Mounting 

Note: 

The Roto motor is not included in the Roto Vitamin kit. You can buy yours here!

Interested in purchasing Roto Vitamins? Buy yours today!

• Roto Vitamins

Further technical details are available in our datasheet. 

E3D Team