Ledge Shelf for 3" Slatwall

A simple light duty small shelf for use with standard 3" slatwall.  I suggest printing with 4 perimeters and 15-20% infill or so.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage.  Don't force it onto your wall if you feel too much resistance.

These must be printed on their sides for strength.  If you have good build surface adhesion you can get away without a brim, but the little thin part that latches up into the slatwall has a tendency to warp and pull away from the build surface.