Gamma 9900 Stringer Tool Tray Organizers

These Models are for tool organizers for the Gamma 9900 Racket Stringing Machine Tool Tray. Some of these models are specific to this machine and the specific tools and may not fit other machines or tools. They can be printed from most any plastic depending on the peak temperature of your application environment (I used PLA or PETG). Supports are not required and default print settings should be fine.

Left Side Tool Holder

Babolat Stringing Tools - String Cutting Pliers, Bent Needle Nose Pliers, Blunt Awl, Cam Action Pliers, two Starting Clamps, Thin Awl, Stringbed Shear,

Xuron 170-II MicroShear Flush Cutter,

Tape Measure

Improved 2b version has additional spacing around the awl handles and better holders for Xuron cutters and tape measure

Right Side Tool Holder

6mm Tee Handle Hex Wrench for machine adjustments,

2.5" or 65mm on a side tea tin for trash and cut ends,

Half size Index Cards,

Fine Point Sharpie,

Chapstick for lubricating string ends,

Starting Clamp Spacer and 3 Bumpers from my other Printables page

Improved 2b version adds holders for two AAA batteries for the tension calibrator and the Hex wrench holder is hexagonal to help hold the handle away from the display

Stand for Tourna StringMeter

This ring supports the StringMeter and protects the prongs