DC Motor Mod for V-Spooler 1.0

I made it possible to use the DC Motor Mod with the latest version of V-Spooler 1.0.
Other published motor mods are incompatible, so I had to make some changes.

✔ I used the cheapest motor ZGA37RG from Aliexpress (https://aliexpress.ru/item/32587420240.html?spm=a2g2w.orderdetail.0.0.4ecc4aa6JsgZbt&sku_id=12000025482130554): 12 volts, 150rpm.
It turned out that the power and torque of this motor is more than enough, the spools spin perfectly.

✔ I also use a power supply Mean Well RS-25-12 (https://aliexpress.ru/item/4000508207207.html?sku_id=12000033333882170&spm=a2g2w.productlist.search_results.0.7f541198v0ZNcE), for it I made a special case to place it nearby.

✔ To connect the motor and drive axel and gear I made a special adapter (I recommend to print it with 100% filling for reliability).

✔ All parts from V-Spooler 1.0 are remained unchanged except for the Motor Gearbox Cover - I made some additional holes in it so that the motor holder could be attached to it.

✔ I also add here a modified version of Brace Rear Bottom - I made special holes in it for attaching V-Spooler to the board.

How to print:
Material: any strong material (I made with PLA)
Layer height: 0.2mm
Number of walls: 3
Number of bottom layers: 4
Number of top layers: 4
Filling: 30% for all the parts and 100% for adapter
Supports: required for Power Supply case and for Motor Mount
Brim: not required