Gift Box - Secure Closure

Print | Easy print. Orient both box models with the flat side down. Orient the ribbon on edge in a different color. Any material. 

Prints best with supports. Consider bridges oriented across the short length of the slot on the bottom of the box. Adjust Print Settings-Bridging Angle to 180 degrees or whatever you need to orient correctly. See image of the underside of the sliced box models attached. 

Box interior is about 53mm x 53mm x 30mm. Scale as necessary. 

Use | To open, grip the sides of the ribbon with your thumb and forefinger, pull down and slide off. 

Enjoy!