"HONDA" Letters for Motocompacto

The files are as follows:

1. 2mm extruded “HONDA” text suitable for 3D printing if you want embossed text on the sides of the Motocompacto
2. SVG file of “HONDA” text if you have a vinyl cutter.  Ensure the “H” is 17.8mm tall and the rest of the logo should scale properly.
3. A model/svg set of letters that are OFFSET by 0.1mm to fit into the recessed cutouts better than the line-to-line models.  Ensure the “H” is 17.6mm tall and the rest of the logo should scale properly.
4. A zipped GIMP .xcf file containing the paths used to generate the SVGs and 3D models in case you need more offset!

Note that this is a tight fit, so if you have elephant's foot, the text won't fit.  I recommend 3D printing upside-down on the build plate so the visible surface is actually facing down while printing.

I held my 3D printed letters onto the scooter with some Scotch double-stick tape.  YMMV depending on how you plan to adhere; adhesives are a science on their own.