September 23, 2024
Description
This is the housing for the ESP32 based ethernet I/O board for home automation. There is a commercial DIN rail mount housing, but I did not wanted to modify one, so I have designed my own. Mine version is a lot smaller.
NOTE: For my design, I used regular 3.81mm screw terminals ( Degson DG381 3,81), so the ones originally used might not fit the case.
Project GitHub page: https://github.com/pilotak/eth-io
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
The Restless Maker
