December 5, 2025
Description
Variation on Spiral Fidget
This is not as simple a design to print as it might seem. Start printing LampExt.stl first, usually problems arise with this file, the part breaks in the base area. It seems to me that this is due to the plastic itself and or printing settings.
...and of course read the comments, there are useful tips and links 🫶
You can try using a test file with support LampExt v4test.stl, and also if there are printing problems, try 0% infill (2 walls)
LampExt.stl, LampInt.stl - I used a raft, to increase the contact spot.
LampInt.stl - enable “avoid crossing perimeters”
Don't forget to give me a like 🧡
Share photos of your prints 💡
‼ 💡➡👄🚫 ‼
//26 oct.2024 added bonus 💀
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
bigovereasy
